• sns01
  • sns02
  • sns03
  • sns04
  • sns05

Q3710 hanger hook type shot blasting machine

Short Description:

The machine is designed for cleaning up boxes, structure parts, casting and forging parts afraid of collision, and it also can be used to size is under 1000*1600mm workpieces.

The machine can clean up the rust, scale, sand, dirt etc. of the workpiece, make the workpiece surface and visible part appear metal luster, exposed the surface defect of casting parts. Surface roughness can achieve GB6060.5, accord with China national GB8923-88 A-B Sa2 1/2 level. It can increase the adhesion of paint film when the workpiece is painted, and finally achieve the aim of improving the surface and inner quality of the entire workpiece.


  • Supply Ability: 300 sets per year
  • Min.Order Quantity: 1set
  • Delivery Port: Qingdao port, China
  • Delivery time: Within 30working days
  • Place of origin: Shandong, China (Mainland)
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

    Q3710 hanger hook type shot blasting machine

    Summary

    The machine is designed for cleaning up boxes, structure parts, casting and forging parts afraid of collision, and it also can be used to size is under 1000*1600mm workpieces.

    The machine can clean up the rust, scale, sand, dirt etc. of the workpiece, make the workpiece surface and visible part appear metal luster, exposed the surface defect of casting parts. Surface roughness can achieve GB6060.5, accord with China national GB8923-88 A-B Sa2 1/2 level. It can increase the adhesion of paint film when the workpiece is painted, and finally achieve the aim of improving the surface and inner quality of the entire workpiece.

    Technical parameter

    No.

    Item

    Qty

    Parameter

    Work piece size

     

    Max: Ф1000*1600mm, weight:≤1000 kg

    Cleaning standard

     

     In accordance with standard GB8923-88 A-B Sa2 1/2,surface roughness Ra12.5

    Cleaning time

     

    3-10min/hook

    Blast wheel

    2

    Type: QD034Abrasive flow rate:2×250 kg/min

    Speed of blasting:75-80 m/s

    Motor Power:2×15 kW

    Abrasive used

     

    Ф0.8-2mm

    Initial adding amount

     

    3 MT

    Bucket elevator

    1

    Elevating amount:30 t/h  power:4kW

    Screw conveyor

    1

    Conveying amount:30 t/h, power:2.2kW

    Separator

    1

    Separating amount:30 t/hWind speed:4~5 m/s

    Good abrasive ratio in waste material:≤1%

    Motor power: 2.2KW

    10 

    Abrasive control system

    3

    Max flow amount:250 kg/min 

    11 

    Dust collector

    1

    Main fan wind:8000m3/h   Power:7.5kw

    12 

    Hook running device

    2

    Running speed:20m/min Power:2*0.2kW

    Lifting speed:8m/min Power:2*1.5kW

    13 

    Hook rotation device

    1

    Rotation speed:2.8r/min

    Motor power:0.75KW

    14 

    Dust concentration

     

    ≤85mg/m3

    15 

    Equipment noise

     

    ≤90dB

    16 

    Total power

     

    About 50kW

    The details of the workpiece and machine

    Workpiece: casting for water pipe fitting. Max rotary Dia=1000mm, H=1600mm.

    Blasting Chamber Overall Size2m×2m×3m,(without bottom screw conveyor

    The work efficiency of the machine

    Two Hooksone hook for cleaningthe other one for loading and unloading.

    working efficiencyblasting time 5-8 minutes. Polish 6 hooks per

    hour at least. The said data will be different according to clientsdifferent

    surface cleaning demands.

    The main design ideas

    • According to userssite and production, choose double hooks shot blasting machine, Yshape structure, load and unload work pieces efficiently,improve production efficiency.
    • Max rotation diameter:1.0m. Max height :1.6m

    Its necessary to point outif high loading densities of work pieces, crowded together, will lead bag surface cleaning Effect.

    • 2 sets large power blast wheels for better cleaning effect and high productivity, evenly covers surface of work pieces, to avoid bad cleaning effect.
    • In order to save steel shots, setting chamber between blasting machine and dust collectorbeneficial to abrasives recovery.
    • Based on customer requirement, we can supply pneumatic control or electric control brake valve, control blast wheel abrasive supply.
    • The equipment use of screw and gravity selection combined full curtain type separator, separate abrasive and dust effectively, improve the efficiency of workpiece cleaning to protect the workpiece surface cleaning effective.
    • Between the host and the dust collector, it install settling box, it can save  3-5 tons steel shots per year.
    • It use shifting fork type cover plate in the top of the equipment, compact structure, prevent abrasive outleakage.

    Hook type shot blasting machine details (13) Hook type shot blasting machine details (12) Hook type shot blasting machine details (11)

     

    Hanger blasting machine projects (8) Hanger blasting machine projects (7)

    If the machine is not suitable for your workpiece, please tell us the following information:    

    1)     What kind of workpiece will you clean?  

    2)    The size of workpieces(length, width and height of maximum  workpiece,Length, width and      height of minimum workpiece?)   

    3)     How many  the weight of maximum and minimum workpiece? 

    4)     Please tell us your requirement cleaning efficiency?   

    According to your infomation, the most suitable machines will be designed for your workpieces.


  • Previous:
  • Next:

  • WhatsApp Online Chat !