PLATE TUBE PROFILE PAINTING AND SHOT BLASTING SYSTEMS
PLATE TUBE PROFILE
PAINTING AND SHOT BLASTING SYSTEMS
|Size of steel||Length (mm)||≤12000||≤12000||≤12000||≤12000||≤12000||≤12000||≤12000||≤12000||≤12000|
|Processing speed (m/s)||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4||0.5-4|
|Shot blasting rate (kg/min)||4*250||4*250||6*250||6*250||6*360||6*360||8*360||8*360||8*490|
|Thickness of paint (um)||15-25||15-25||15-25||15-25||15-25||15-25||15-25||15-25||15-25|
· Complete systems quoted
· One supplier for all components
· Proven abilities – Industry leader
· Quality components
· Proven technology
· Custom designs – Flexible layouts
· Simple integration into existing manufacturing processes
· Wide range of system sizes and variants
This shot blasting machine and painting line is mainly used for surface treatment (namely preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts.This machine is widely used in Shipyard, ship building industry, machinery industry, etc.
We can design and manufacture different size of steel plate pretreatment line according to customers’ requirement. Please send your detail inquiry to our email.
This type of steel plate auto blasting and coating machine is designed and produced by adopting the advantages of similar products from both within the country and abroad. The rusting cleaning part (shot blast cleaning) adopts high-efficient blast wheel and full shutter type shot sand separator. The sweeping machine adopts specially made high-strength nylon rolling brush and high-pressure ventilator. The preheating and drying part may adopt various heating methods. The paint spraying part adopts high-pressure airless spraying method. The complete set of equipment is controlled by PLC, and is the large-size complete equipment of international advanced.
A complete blasting and painting line consisting of individually adapted conveyor systems, a pre-heater, shotblasting machine, paint booth, and a post treatment dryer. Conveyor systems can be chosen according to individual requirements, together with roller conveyors, traveling grates, and cross transfer lines, etc. A gas-fired pre-heater unit allows the treatment of wet or even ice-covered material from outside storage. The paint layer produced in the paint booth will be dried in line by the post dryer unit, allowing the handling of the components immediately upon exit for further treatment steps. To reduce energy costs, the final drying process uses waste heat energy from the pre-heater.
Roller conveyor lines are an essential part of the overall preservation system. The components (plates, tubes or profiles) continuously pass through the pre-treatment chamber, the blasting chamber and the cleaning chamber, on a special roller conveyor. The high performance turbines mounted on the cabin housing ensure all-round coverage under controlled process conditions, and thus produce the desired cleaning effect.
Steel plate/sheet preservation/pretreatment line details parts
Steel plate pretreatment line in Shandong province
Steel plate shot blasting and painting line in Shandong Qingdao
Steel sheet blasting and painting machine in guangdong province
Steel plate shot blasting and painting equipment in Sichuan province
If the machine is not suitable for your workpiece, please tell us the following infromation:
1) What kind of workpiece will you clean?
2) The size of workpieces(length, width and height of maximum workpiece,Length, width and height of minimum workpiece?)
3) How many the weight of maximum and minimum workpiece?
4) Please tell us your requirement cleaning efficiency?
According to your infomation, the most suitable machines will be designed for your workpieces.