• sns01
  • sns02
  • sns03
  • sns04
  • sns05

manual shot blasting booth/room with recovery system

Short Description:

Sand/shot blasting room/booth is primarily for cleaning big workpiece with manual type, such as, steel structural parts, vessel, truck chassis to remove the rusty spot, rusty layer and scale cinder on steel to obtain a uniform, smooth and glossy metal surface allowing improved coating quality and higher anti-corrosion performance, the surface stress of steel is strengthened, and the service life of workpieces is prolonged.


  • Supply Ability: 300 sets per year
  • Min.Order Quantity: 1set
  • Delivery Port: Qingdao port, China
  • Delivery time: Within 30working days
  • Place of origin: Shandong, China (Mainland)
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

    manual shot blasting booth/room with recovery system

    Flarcar/trolley through type Sand/shot blasting room/booth is primarily for cleaning big steel structural parts, vessel, truck chassis to remove the rusty spot, rusty layer and scale cinder on steel to obtain a uniform, smooth and glossy metal surface allowing improved coating quality and higher anti-corrosion performance, the surface stress of steel is strengthened, and the service life of workpieces is prolonged.

    Technical Parameter

    No. Item QTY/Note Technical Parameter/Note
    1 Sand Blasting Room Outline Size (L*W*H) 5000*4000*4000mm(or as customer’s requirement)
    2 Cleaning efficiency   GB8923-88A-B  Sa2-2.5
    3 Abrasive Size   Ø 0.8~1.2mm
    4 Sand Blasting efficiency   2*(15-18)m2/h
    5 Abrasive Consumption Rate   140g/m2
     6 Sand Blasting System   1 Type Q0250-II-LX
    Spray Gun QTY 2pcs
    Sand blasting pot 1set
    Air pressure 0.5-0.7MPa
    Air consumption 2*6.1m3/min
    Spray Capacity 2*(1800-2200)kg/h
     7 Elevator 1 Capacity:15t/h
    Power:1.5kw
     8 Seperator 1 Capacity:15t/h
    Wind Speed:4-5m/s
    9 Longitudinal Scraper conveyer 1 Convey capacity:15t/h  
    Air consumption: 1.0 m3/min
    10 Transversal Screw conveyor 1 Convey capacity:15t/h  
    Power: 2.2KW
    11 Flatcar 1 User-supply
    12 Dedusting System Dust Collector Type Filter cartridge type
    Dedusting air Valume 11000m3/h
    Filter Cartridge(Pcs) 16Pcs
    Compressed Air requirement 1.0 m3/min
    Fan Power 11KW
    13 Lightproof Lamp 8 300LUX
    Power:0.15*8=1.2KW
    14 Abrasive initial filling   3000kg
    15 Noise   ≤90dB, According with GB3.96-93《City Area environment nosie standard》
    16 Total Power   About 15.9kw (it don’t include air compressor motor power)
    17 Compressed air consumption   About 14.2 m3/min(User-supply)
    18 Exhaust emmission   30mg/ m3   GB16297-1996

    The main design ideas

    1. Flatcar type sand blast cleaning system

    2. New type scraper conveyor structure

    3. continuous sand blasting system with spraying guns

    4. Dust collector in multiple positions

    5. Two safety door both front and back positions

    Summary

    The sand blasting room is a kind of nonstandard machine equipment and widely used in the surface cleaning and rust removal for different type of semi-finished products, castings, weldments, heat-treated parts, steel structural components, modular containers, transformer casing, irregular parts, etc.
    The main composition is as follow, sand blasting cabinet, sand blasting machine, elevator, separator, scraper conveyor, screw conveyor, abrasive control system, illuminating system, dust collector, electric control system etc.

    The equipment function and working principle

    Hanging the workpieces into to the flatcar, the door open, flatcar carry the workpieces into the blasting chamber —- dust collector open —- separator open —- bucket elevator open —- transversal screw open —- horizontal scraper open —- sand blasting pot open —- manual operation to sand blasting the workpiece, after cleaning up and checking the efficiency is qualified,  open the door, flatcar carrying workpiece out of blasting chamber.

    Indonesia 18m length sand blasting room installation site

    18m sand blasting room Indonesia (1)

     

    18m sand blasting room Indonesia (5)

     

    18m sand blasting room Indonesia (6)

     China flatcar through type sand blasting booth installation site

    sand blasting chamber (5) sand blasting chamber (6)

     If the machine is not suitable for your workpiece, please tell us the following infromation:    

    1)     What kind of workpiece will you clean?   

    2)    The size of workpieces(length, width and height of maximum  workpiece,Length, width and      height of minimum workpiece?)    

    3)     How many  the weight of maximum and minimum workpiece?  

    4)     Please tell us your requirement cleaning efficiency?    

    According to your infomation, the most suitable machines will be designed for your workpieces.


  • Previous:
  • Next:

  • WhatsApp Online Chat !