• sns01
  • sns02
  • sns03
  • sns04
  • sns05

Manual type spray painting booth for car truck body big parts

Short Description:

The complete equipment of the dry spray paint room is composed of the main operation room, the air supply and exhaust system, the air supply and exhaust piping system, the exhaust gas treatment system of the heating system, the fire fighting system, the electronic control system and the lifting operation platform.


  • Supply Ability: 300 sets per year
  • Min.Order Quantity: 1set
  • Delivery Port: Qingdao port, China
  • Delivery time: Within 30working days
  • Place of origin: Shandong, China (Mainland)
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

    Manual type spray painting booth for car  truck body big parts

    The complete equipment of the dry spray paint room is composed of the main operation room, the air supply and exhaust system, the air supply and exhaust piping system, the exhaust gas treatment system of the heating system, the fire fighting system, the electronic control system and the lifting operation platform.

    Features:

    • Efficien
    • High performance
    • Easy to install

    Spraying Booth Details               

    Outside size:mm

    According to buyer’s parts size

    Inside size:mm

    According to buyer’s parts size

    cabin system

    1. wall panel:EPS (polystyrene) insulation board,thickness 70mm,with life   span 20 years.
    2. entrance doors with aluminum frames.
    3. full ramps made of embossed steel.

    air outlet and inlet system

    1. the YDW series centrifugal fan is of Siemens technology, this fan has low noise, large air volume,low energy consumption,etc.        
    2. the ait inlet cabinet and air outlet cabinet is aluminum framed.

    air purification system

    dual filtering structure:the primary fillter can capture granules larger than 15μm;the ceiling filter  can capture granules larger than 5μm,with the total filtering rate 98%.

    heating system

    1. Italian RG3S diesel burner,16,0000calaries per hour,with fuel consumption5~6kg/vehicle,                               heating time 5~7minutes.
    2. SUS304 stainless steel heat exchanger,argon arc welding,with heating-exchanging rate 90%.
    3. the fuel tank is 50L,equipped with Fuel display device and diesel filtering device.

    lighting system

    Philips lamps equipped with ballasts,and bottom lamps,1000LUX.

    control system

    spraying&baking switch,light switch,emergency stop,breakdown alarm,timer.

    environmental system

    muti-layers of fiberglass filter and shelf with active carbon,ensuring a high level of environment-friendliness.

    others

    1. with one tool box where the spraying tools can be put.
    2. with one set of Frame rail made of stainless steel,where little spare parts can be put and painted.

     喷砂房 (31)

    Other information:

    1. Pre treatment coating series: physical various treatment, including sand blasting and shot blasting; chemical passing through
    spraying type, tank immersion type, tank immersion spraying type.
    2. Electrostatic powder coating series: all kinds of imported, domestic, manual,
    automatic powder spraying equipment, all kinds of material powder spraying chamber, pulse recovery, multi-tubed cyclone + filter
    core, cyclone + bag recovery device.
    3. Immersion, painting and coating series: all kinds of imported, domestic, manual, automatic painting equipment,manual, cup type
    electrostatic painting equipment, dry type, water curtain type, water-rotating type, whirlwind vortex volume, telescopic, Ω type,
    these kinds of painting booth, all sorts of circulating varnished slots.
    4. Coating production line: drying, curing system, strong far infrared electric heating, energy-saving coal, coal gas (gas,LPG,
    natural gas), fuel oil, steam heating system.
    5. Electrophoresis coating production line: cathode, anode, beat, automatic electrophoresis production line, etc.

    This design fully considers the following aspects:
    1. Ensure coating quality. The whole line is designed to be free of dust and residue, reduce the quality problem factor, and
    ensure the improvement of coating quality.
    2. Ensure the advanced structure and reliable performance of the production line, and adopt the latest structure and latest patent
    technology under the economic and reasonable principle.
    3. Give full consideration to energy-saving and cost-reducing technologies to reduce production and operation costs and
    maintenance costs.
    4. Give full consideration to organic combination of advanced technology and reasonable investment.

    The design features and new technologies of this production line are described as follows:
    1. Automatic powder spraying, which is convenient and flexible and greatly improves production efficiency.
    2. Pulse filter cartridges recovery system to make full use of powder, which greatly improves the utilization rate of powder.
    3. The inner wall of the solidified oven is smooth, flat and free of dust. It is a straight-through structure. The inlet and
    outlet ends are provided with an air curtain device to reduce heat leakage.
    4. Natural gas heating is adopted in the baking path, which is energy saving and environmental protection.

    Painting booth (1) Painting booth (2) Painting booth (4) Painting booth (20) Painting booth (25) Painting booth (29)

     

     


  • Previous:
  • Next:

  • WhatsApp Online Chat !